Pleasant Hearth 230-217-379 Mode D'emploi page 6

ASSEMBLY INSTRUCTIONS
7. Attach the Upper Side Panels (D) and the Media
Partition (J) to the Media Shelf (C) by inserting
six Wood Dowels (CC) into the unthreaded holes
as shown in the diagram. Insert four Cam Locks
(AA) into the Upper Side Panels (D) and tighten
as shown in the cam lock assembly guide.
Insert and tighten one Screw (MM) through the
underside of the Media Shelf (C) and into the
Media Partition (J).
8. Insert five Wood Dowels (CC) into the
unthreaded holes on the top of the Upper Side
Panels (D) and Media Partition (J) as shown
in the diagram. Insert six Cam Locks (BB) into
the mantel assembly as shown in the diagram
and tighten as shown in the cam lock assembly
guide.
9. Locate the two Side Back Panels (M) and the
Upper Back Panel (L) and line them up to the
back of the mantel assembly with the finished
side facing in. Insert and tighten thirty-four Back
Panel Screws (DD) to attach the two Side Back
Panels (M) and the Upper Back Panel (L) to the
mantel assembly.
7
D
8
CC
9
M
DD
6
BB
CC CC
MM
J
D
A
BB
A
L
M