Electrolux EHS60210P Notice D'utilisation page 17

THE HEAT SETTING
Touch the control bar at the necessary heat
setting. The heat setting indicators come
on.
/ SWITCHING THE OUTER
RINGS ON AND OFF
You can match the effective heating surface
to the size of the cookware.
To switch on the outer ring touch the sen-
sor field / . The indicator comes on.
For more outer rings touch the same sen-
sor field again. The next indicator comes
on.
Do the procedure again to switch off the
outer ring. The indicator goes out.
THE AUTOMATIC HEAT UP
The Automatic heat up function sets the
highest heat setting for some time, and
then decreases to the necessary level. You
can get a necessary heat setting in a short-
er time.
A
Touch . The display flashes. Set the heat
setting (1-8). The display of the heat setting
comes on. The display of automatic heat up
function comes on and after some time
goes out.
The time of the automatic heat up changes
for different heat settings.
All manuals and user guides at all-guides.com
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4
USING THE TIMER
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for one cooking
session.
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
• Selection of the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
• Starting the Count Down Timer: touch
of the timer to set the time (
minutes). When the indicator of the cook-
ing zone flashes slower, the time counts
down.
• Checking the remaining time: select
the cooking zone with
of the cooking zone flashes faster. Dis-
play shows the remaining time.
• Changing the Count Down Timer:se-
lect the cooking zone with
.
• Stopping the timer: select the cooking
zone with . Touch
time counts backwards to
cator of the cooking zone goes out. To
switch off You can also touch
at the same time.
electrolux 17
5 6 7 8 9
00 99
-
. The indicator
touch or
. The remaining
00
. The indi-
and