Sommaire des Matières pour Delta TRINSIC 9159-DST Serie
Page 1
Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta faucet you will need: ® • To READ ALL the instructions completely before beginning.
Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.
Page 3
Sistema de protección contra el contraflujo Su llave de agua tipo deslizable Delta tiene un sistema de RP80977 RP71655▲ Wand Retainer &...
Page 4
Mount Faucet to Deck Your faucet is designed for a hole diameter of 1 3/8" Secure faucet to sink with washer and mounting nut (1). Tighten securely by hand. Using a Phillips +/- 1/4" (35 mm +/- 6 mm) and a deck thickness of up screwdriver, tighten locking screws (2).
Page 5
OPTIONAL / OPCIONAL / FACULTATIVE Optional Escutcheon Installation Hose Installation For optional installations using the 10 1/2" escutcheon, order Leave blue clip (1) installed on hose to prevent from being pulled into spout during RP64070 (specify finish) not supplied. Place the 10 1/2" installation.
Loop tubing created. Delta is not responsible for tubing that is l Tubing is cut too short: buy a coupling union and a (2) if it is too long. Note: Recommended tubing...
Page 7
Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el corte boca abajo. esté recto. Custom Fit Connections - Plastic Sleeve Installation Instructions 1.
Maintenance If faucet exhibits very low flow – Unscrew hose from spray head and clean debris. Turn on hot and cold water supplies (1). Pull the hose assembly (2) out of the spout. If faucet leaks from under handle or from spout outlet – Insert a small Be sure to hold the end of the hose down into the sink and turn faucet handle (3) to screwdriver into slot (2) in button (3) and remove.