Service - Siemens BT 200 Mode D'emploi

All manuals and user guides at all-guides.com
BT 200

4.6 Service

Settings
The following settings can be changed in the
Service menu.
Language (German/English/French/
-
Italian/Spanish/Portuguese)
-
Loop resistance (50 to 200 Ω/km)
-
Baud rate (9600 baud to 12 Mbaud)
-
- Contrast (↑↓)
Log mode (on/off)
-
Communication
Activate the interface for data transmission for
the log function.
Displays
The Service menu gives you the following in-
formation.
- Firmware version
Battery capacity
-
Hardware test
This tests the internal hardware.
Calibration
Calibration is not necessary when the stan-
dard type-A PROFIBUS cable is used.
The accuracy of distance and reflection mea-
surement is achieved by calibration with 2 test
cables of different known lengths.
Fig. 6 Principle of calibration
(S)J31069-D0075-U001-A2-6318
04/00 English
Page 17