Disassembly - Fagor ENERJUICER Manuel D'utilisation

5. To place the pulp collector into
correct position, slightly tilt and
push towards the base of the unit.
7. Place the juice collector or a glass
under the spout to avoid any
splatter.

DISASSEMBLY

1. Turn the juicer off by turning
the speed dial to position "0"
and make sure the motor stops
completely. Unplug the power
cord from the wall outlet.
6. Slide the food pusher down the
feed chute by aligning the arrow
on the top of the food pusher with
the small indent on the inside of
the top of the feed tube.
2. Remove the pulp collector by
tilting it away from the motor
base.
6
3. Pull the safety locking arm from
the top grip away from cover and
lower down out of position.
5. Remove the filter by pulling up
from opposite ends. The micro-
mesh filter contains very sharp
blades on the bottom and should
be removed with utmost caution.
7
4. Lift and remove juice cover.
6. Remove the bowl by pulling
upwards from opposite ends.