GE 20 Série Manuel D'utilisation Et D'installation page 27

INSTALL CENTER HINGE PIN
9
A Install the center hinge pin.
NOTE: On models with a freezer door,
be sure to put the washer between the
top of the freezer door and the bottom
of the center hinge.
Freezer Door Models
TRANSFER REFRIGERATOR
10
DOOR STOP
A Remove the door stop on right side of
the bottom of the refrigerator door by
removing the two screws.
B
Move the plastic hinge hole thimble to
the opposite hole.
C Install the door stop on the left side,
making sure to line up the screw holes
in the door stop with the holes in the
bottom of the door.
A
Bottom of
Refrigerator Door
(Right Side)
TRANSFER REFRIGERATOR
11
DOOR HANDLE TO RIGHT
Refer to Remove the Fresh Food Door
Handle and Attach the Fresh Food Door
Handle sections for instructions.
Installation Instructions
Freezer Drawer Models
Bottom of
Refrigerator Door
(Left Side)
REHANG REFRIGERATOR DOOR
12
A Lower the refrigerator door onto the
center hinge pin. Ensure that the white
hinge pin thimble is on the center hinge
pin or inside door hinge pin hole located
in the bottom of the door.
Insert the top hinge pin into the hinge
B
hole on top of the refrigerator door. Make
sure the door is aligned with the cabinet.
Attach the hinge to the top of the cabinet
loosely with the bolts.
C Make sure the gasket on the door is
flush against the cabinet and is not
folded. Support the door on the handle
side and make sure the door is straight
and the gap between the doors is even
across the front. While holding the door
in place, tighten the top hinge bolts.
Replace the hinge cover.
27