Lloyd's LBT103 Mode D'emploi page 9

    
We recommend having this speaker professionally mounted.By using the included wall
mounting accessories, the sound bar can be mounted onto a wall.
Distance Between Two Brackets
You will need
- Level
- Pencil
1/. Mounting on the wooden wall
You should use
1. Use the TAPE MEASURE to decide how high you'd like to hang the SOUND Bar
on the wall. The SOUND Bar must be hung within 5 feet of an AC power outlet for
the attached AC power cord to reach.
2. Mark the position of the mounting screws on the wall using a pencil.
3. Line the LEVEL up on both of your mark sure they are level. If they're not, adjust
the marks as needed to make them level.
4. After you've double checked your marks, drill through the EVA with screw directly
into the marks that you have made on the wall.
5. Use the LEVEL to check that the mounting screws
are level.
6. Put the Sound Bar onto the mounting brackets, and
make sure there is a firm and stable connection
before letting go of the Sound Bar.
7. Finally, use the LEVEL to confirm that
the Sound Bar is level.
All manuals and user guides at all-guides.com
- Tape Measure
- Manual or Electric drill
8
2 pcs short screws