Lloyd's LBT103 Mode D'emploi page 11

  
Problem
No power
No sound
The remote control
won' t work
No sound from
in BT mode
 
Power Source :.........................................DC
Power Source of Remote Control:................DC
Power Consumption:...............................Maximum 30W
Audio Power :
Left Channel ................................10W
Right Channel...............................10W
Impedance of Speakers :
Left Channel ................................8 Ohm, 10W max
Right Channel................................8 Ohm, 10W max

1 x User's Manual
1 x Remote Control --- uses 1X CR 2025 button cell (Included)
1 x AC Adaptor (Input: AC 100-240V~, 50/60 Hz, 1.0A;
Output: DC 15V, 1.2A, )
1 x 3.5mm LINE In cable
1 x RCA cable
2 x Screws
2 x Plastic Tubes
2 x EVA spacer
All manuals and user guides at all-guides.com
What to do
Check the connection of the AC/DC adapter
between the unit and wall outlet.
Check that the volume control is NOT at minimum
Check that it is NOT set to mute.
Replace the battery.
Make sure there are no obstacles obscuring
the front of the unit.
Check if you have pairing or not. It needs to pair
the external BT player and the speaker with
password "0000" before 1st time listening.
10
15V 1.2A
3V, 1X CR 2025 battery (Included)