Hardware Installation - Grandstream Networks GWN7610 Guide D'installation Rapide

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

OVERVIEW

The GWN7610 is a high-performance 802.11ac wireless access point for

small to medium sized businesses, multiple floor offices, commercial loca-

tions and branch offices. It offers dual-band 4x4:4 MU-MIMO technology

and a sophisticated antenna design for maximum network throughput and

expanded Wi-Fi coverage range. To ensure easy installation and man-

agement, the GWN7610 uses a controller-less distributed network man-

agement design in which the controller is embedded within the product's

web user interface. For the sake of large-scale deployment, GWN7610

also supports to be managed by GWN Cloud system. With support for fast

roaming, advanced QoS, low-latency real-time applications, 200+ client

devices per AP and dual Gigabit network ports with PoE/PoE+, combin-

ing with the features of Mesh, Captive Portal and seamless connection

with Grandstream WP8XX series Wi-Fi phone, the GWN7610 is an ideal

wireless access point for large and small wireless network deployments.

PRECAUTIONS

• Do not attempt to open, disassemble, or modify the device.

• Do not expose this device to temperatures outside range of 0 °C to 50

°C for operating and -10 °C to 60 °C for storage.

• Do not expose the GWN7610 to environments outside of the following

humidity range: 10-90% RH (non-condensing).

• Do not power cycle your GWN7610 during system boot up or firm-

ware upgrade. You may corrupt firmware images and cause the unit to

malfunction.

PACKAGE CONTENT

1x GWN7610

Mounting

Access Point

Bracket

3 x Screw

(PM 3 x 50)

(PA 3.5 x 20)

3x M3 NUT

Ceiling Mounting

Bracket

3 x Plastic

1 x Quick Installation

Expansion Bolt

Guide

1 x GPL Statement

~ 1 ~

GWN7610 PORTS

Port

Description

POWER

Power adapter connector (DC24V, 1A)

Note: Power adapter is not provided.

NET/POE

Ethernet RJ45 port (10/100/1000Mbps) supporting

PoE.

NET

Ethernet RJ45 port (10/100/1000Mbps) to your

router or another GWN7610.

USB 2.0 port (for future IOT & location based ap-

plications)

RESET

Factory reset button. Press for 7 seconds to reset

factory default settings.

POWERING AND CONNECTING THE GWN7610

GWN7610 can be powered on using PoE/PoE+ switch using following

steps:

Step 1: Plug a RJ45 Ethernet cable into the network port of the

GWN7610

Step 2: Plug the other end into the uplink port of the power over Ether-

net (PoE) switch.

Network Port