Omega C2100S Manuel page 5

NEVER ALTER THE APPLIANCE. ALSO, DO NOT DISASSEMBLE OR REPAIR BY
YOURSELF. DO NOT INSERT FINGERS, FOREIGN SUBSTANCES OR OBJECTS SUCH AS
PINS INTO GAPS OR HOLES IN THE BASE.
It may cause a fire, an electric shock or a failure. For any technical support,contact the
authorized local Customer Care Center.
DO NOT MOISTEN THE BASE OR SPLASH WATER ON THE BASE.
Be careful not to let any liquids or other substances get into the switch on the appliance.
DO NOT OPERATE THE SWITCH WITH WET HANDS.
It may cause electric shock or a fire.
WHEN THE POWER CORD, WIRE IS BROKEN OR DAMAGED OR THE PLUG-IN PART
BECOMES LOOSE, DO NOT OPERATE IT.
It may cause an electric shock, a fire or an injury.
FOR SAFETY, MUST DO GROUND CONNECTION DO NOT DO THE GROUNDING ON GAS
PIPE, PLASTIC WATER PIPE, TELEPHONE WIRE, ETC.
It could cause an electric shock, a fire, or a malfunction and an explosion. Be sure to use
the socket with ground connection.
NEVER DISASSEMBLE BOWL SET DURING OPERATION OR INSERT FINGERS,
FOREIGN OBJECTS SUCH AS FORKS, SPOONS ETC. INTO FEEDING TUBE OR JUICE
OUTLET.
It may cause an injury, an accident or a failure.
THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN)
WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF
EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE
FOR THEIR SAFETY.
Children should be supervised to ensure that they do not play with the appliance.
DO NOT OPERATE WITHOUT LOCKING THE PARTS PROPERLY.
It may cause an injury or a failure.
IF A GAS LEAK IS DETECTED, DO NOT PLUG IN THE APPLIANCE'S POWER CORD INTO
A POWER OUTLET. IMMEDIATELY VENTILATE THE ROOM BY OPENING A WINDOW,
AND ALLOW TO FULLY VENTILATE BEFORE PLUGGING IN THE APPLIANCE.
It may cause an injury or a failure.
IF SCREW ROTATION IS STOPPED IN NORMAL OPERATION, PRESS (REVERSE/REV)
BUTTON AND HOLD FOR 2~3 SECONDS AND THEN AFTER REVERSE OPERATION IS
COMPLETELY STOPPED, PRESS (ON) BUTTON AGAIN.
If the problem continues during the operation, the parts may be damaged and
performance may be deteriorated due to overheating in a motor. When the problem
continues, immediately stop the appliance and contact the local Customer Care Center.
4