Sauder 421191 Instructions De Montage page 25

Step 20
NOTE: You will lift the DOOR by holding onto the ends of the DOOR TRACK
å
TUBE while the DOOR hangs from the TUBE.
NOTE: A corner of the unit is cut out to show part of the assembly.
å
Place the DOOR TRACK TUBE (111M) with the DOOR (O) onto the DOOR
å
TRACK SUPPORTS (105M).
Now, fasten the DOOR TRACK TUBE (111M) to the two outer DOOR TRACK
å
SUPPORTS (105M). Use two BROWN 1/2" PAN HEAD SCREWS (125S).
Carefully pull the bottom of the DOOR (O) out at an angle. Then, push up
å
on the RETAINING BARS (155M) on the bottom edge of the DOOR and
insert the RETAINING BARS into the DOOR TRACK (110M). Then, press
down on the RETAINING BARS.
See the next step for DOOR adjustments.
å
155M
www.sauder.com/service
125S
O
110M
421191
105M
111M
125S
BROWN 1/2" PAN HEAD SCREW
(2 used in this step)
125S
Page 25