Storage And Transportation; Disposal; Technical Data; General - BASETech 1664136 Notice Originale

• Do not emerge the product into water or any liquids.
• Use a damp, lint-free cloth to clean the housing of the product.
• Clean the ventilation slots at the side cover of the product with a soft brush. Clogged ventilation slots might cause
the engine to overheat.
• Wipe the surface with a dry cloth afterwards.

10. Storage and transportation

• Switch the product off and remove the battery pack.
• Clean the product as described above.
• Store the product indoors, in a dry place inaccessible to children.
• We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to
protect it against dust.
• Protect the product from any heavy impact or strong vibrations which may occur during transportation. Secure the
product to prevent it from slipping or falling over.

11. Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

12. Technical data

a) General
Input voltage .....................................................10.8 V
Maximum torque ...............................................100 Nm
No load speed n ..............................................0-2300 min
0
Chuck size ........................................................6.3 mm (1/4 in)
Operating / storage conditions ..........................0 to +45°C, 20 – 85 % RH
Dimensions (W x D x H) ...................................180 x 57 x 165 mm (without battery)
Weight ..............................................................0.774 kg (without battery)
-1
25