Installation Steps - turbionaire AMA 60 Manuel D'instructions

INSTALLATION
Note: When the range hood and appliance supplied with energy other than electricity are
simultaneously in operation, the negative pressure in the room must be not exceed 4 Pa (4 x
10 -5 Bar).
Required minimum distance hood to
Ceramic-glass rings/hotplates
Gas cooker
Coal / oil / stove wood firing

Installation Steps

Note: Do not connect the power cable until the installation is complete! Get a second
person to help you with the installation.
• Drill 3 holes (Φ8mm to adapt your wall plugs) to place the bracket. Screw and tighten the
bracket to the wall with the screws 3 Screws (ST4x30mm) and 3 wall plugs (not supplied).
• Place the range hood and hook it by using the two notches on the wall bracket.
65 cm
75 cm
85 cm
6