Crosley S100A Manuel D'utilisation page 5

English
Connections
Speaker connection
 Untighten the speaker terminals and use
the speaker wire (included) to connect the
speaker terminals between the left and
right speakers as shown.
 Make sure the + and - terminals from one
speaker are connected to their
corresponding one on the other speaker
correctly.
 Tighten the speaker terminals again to
make a solid connection.
Aux Connection
 Use a RCA to RCA audio cable
(not included) to connect the RCA
output jacks of your device (eg.
TV) to the AUX IN Jacks of the
speaker.
 Use a RCA to 3.5mm audio
cable (included) to connect the
headphone jack or auxiliary
output jack of your device (eg.
phone) to the AUX IN Jacks of
the speaker.
Power Connection
 Ensure the power outlet's voltage
corresponds to the input voltage of
the speakers'.
 Connect the power cord to the
speaker and then into the power
outlet.
5