Muffler Installation - ITC HD7515 Manuel D'instructions

1. Insert the rubber coupling on the motor head air exhaust.
2. Using a Phillips screwdriver, tighten the clamp collar to ensure
adequate sealing.
3. Insert the 90° elbow into the rubber coupling, and tighten the clamp
collar as per instructions in step 2.
4. Apply ABS glue to the 90° elbow and insert muffler.

Muffler Installation

C
B
A
D
Installation
A. Rubber coupling
B. 90° elbow
C. Muffler
D. Air Exhaust
Glue not included.
A
11