Zephyr Monsoon I AK9228BS Guide D'utilisation, D'entretien Et D'installation page 18

Installation Instructions
Preparation & Installation
4. Lift liner into bottom opening of cabinet and
secure to interior of cabinet using (8) #8 x 1/2"
stainless steel screws; (4) screws in the front
and (4) screws in the sides. FIG. D.
5. Finalize installation of electrical and duct work.
Seal duct work with certified aluminum duct
tape. Power on liner, check for leaks around
duct tape and verify proper operation.
NOTE: If access to top of liner is not available
after installation, electrical and duct work
connection may need to be made prior to
installing the liner.
6. Re-install the previously removed bottom panel,
side spacer panels (if applicable), grease tray,
and baffle filters.
18 Monsoon I Use, Care, and Installation Guide
C O R E
M O N S O O N I
I N S E R T
FIG. D