ChemoformGroup SF 122 Notice D'utilisation Et De Montage page 20

Table of contents
Filtration systems – description
1.
1.1 Description of the 6-way valve
1.2 Description of the circulating pump
1.3 Description of the filter container
2. Commissioning
Installation instructions – assembly
2.1
2.2 Filling the silica sand filter
Filling with water – commissioning
2.3
2.4 Rinsing silica sand
2.5 Cleaning the pre-filter
Filter – operation
2.6
2.7 Adjusting the filtration time
2.8 Connecting the sand filtration system to the pool
3. Regular backwashing
3.1 Backwashing
3.2 Rinsing
4. Maintenance work
4.1 Maintaining the filter container
4.2 Maintaining the circulating pump
4.3 General maintenance
5. Decommissioning
Causes of malfunctions – troubleshooting
6.
6.11 Pump does not draw water
6.12 Motor circuit breaker trips
6.13 Circulating pump delivers insufficient output
6.14 Circulating pump is noisy
6.15 Circulating pump does not start automatically
6.16 Circulating pump leaks
6.17 Sand in pool
6.18 Filter pressure not OK
6.19 Water not clear
6.20 Pool loses water
Water treatment – general information
7.
7.1 pH value
7.2 Controlling algae
7.3 Malfunction
7.4 Continuous disinfection
7.5 Turbidity
7.6 Causes of unsatisfactory water condition
from page 1 onwards
D
from page 18 onwards
UK
from page 35 onwards
F
from page 51 onwards
I
All manuals and user guides at all-guides.com
Seite 20 von 135
from page 67 onwards
NL
from page 85 onwards
RO
from page 102 onwards
S
from page 118 onwards
CZ