Mounting Diagram; Mounting Bracket - Iluminarc ILUMILINE SL Guide De Référence Rapide

EN
Mounting
Before mounting this product, read the

Mounting Diagram

Safety cable
Beam Shaping Filters
The Ilumiline SL can be used with the medium, wide, very wide, or asymmetrical beam-shaping filters (sold separately).
To change the filter:
1. Detach the filter retainer lid by removing the 4 screws attaching it to the fixture.
2. Place the beam-shaping filter on top of the lenses. Ensure the glossy side of the filter is facing OUT.
3. Place back the filter retainer lid on top of the beam-shaping filter.
4. Screw the filter and the retainer lid back in place.
3
QUICK REFERENCE GUIDE
Safety Notes.

Mounting bracket

Mounting surface or wall
Ilumiline SL QRG Rev. 5