Adjustment Of Monitor; Instructions For Use; Cable Connection - INNOCN 29C1F-D Manuel De L'utilisateur

Adjustment of monitor

Vertical angle
-90° -+90°

Instructions for use

Cable connection：
* The bottom interface configuration at the back of the monitor varies with products.
* Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or
special components purchased from the manufacture or maintenance department.
Use the HDMI cable to
connect the HDMI IN port
of the product to the
HDMI OUT port of a PC
DP interface
Use the DP cable to
connect the DP IN port of
the product to the DP
OUT port of a PC.
Rotation angle
-45° -+45°
HDMI interface
Use the HDMI-DVI cable
(not included) to connect
the HDMI IN port of the
product to the DVI OUT
port of a PC.
AUDIO OUT
Connect audio outputting
devices such as earphones
to the AUDIO OUT port.
4
Tilting angle
-5.0°- +20°
OR
Height adjustment
0- 120mm
AC IN interface
Please connect the power cable
plug to the corresponding port
of the monitor, and connect the
other end to a properly
grounded power outlet.
Type-C interface
A Type-C line can be used
to connect to data ports of
machines and external
terminals.
service@innocn.com