Installation - Tripp-Lite B118-002-UHD Manuel De L'utilisateur

Installation

Notes:
• The maximum distances referenced in these instructions have been tested
at a UHD 4Kx2K video resolution of 3840 x 2160 @ 24Hz and 30Hz with
36-bit (12 bits per channel) Deep Color using 28 AWG (0.08 mm
cables. Longer distances between the splitter and connected monitors are
achievable using 24 AWG (0.2 mm
• When connecting monitors that support different maximum resolutions, the
video resolution displayed will be limited to the lowest maximum resolution.
For example, if connecting a combination of 1080p and 4Kx2K monitors, a
1080p video resolution will be displayed on all screens.
1 Make sure the power to all devices you will be connecting is
turned off.
2 Connect the HDMI source to the Input port on the splitter.
Note: The length of the HDMI cable connecting the source to the splitter
must not exceed 16.4 ft. (5 m).
17-07-273-9336A7.indb 4
Source
B118-008-UHD
) HDMI cables.
2
4
) HDMI
2
7/31/2017 12:24:18 PM