Premise FL3 Serie Instructions D'installation page 2

LUMINAIRE OVERVIEW
FL3 Mul;-Mount Flood Light
(Trunnion mount included)
All FL3 Mul;-Mount Flood Lights include a trunnion mount for direct
moun;ng to surfaces. Op;onally, a Slip Fider or Moun;ng Arm adachment
can be purchased to replace the included trunnion mount bracket. If a
Moun;ng Arm is used, it can also be adached to a Round Pole Adapter to
mount the flood light to a round pole (4"-6" diameter poles).
HOW TO DIRECT MOUNT TO SURFACE
For Trunnion Mount models:
1. Use expansion bolts to secure the fixture on
moun;ng surface.
2. Keep enough length wires to ensure adjus;ng
angle unhindered.
3. Connect wires into wiring terminal; white wire to
"Neutral" terminal, black wire to "Live" terminal,
green wire to "Ground" terminal; and fix them by
screws. For 208V, connect second live wire to
white wire.
4. Restore the electricity and check the opera;on of
your new ligh;ng fixture.
FL3-SF
Slip Fider Adachment
(Op;onal)
FL3-MA
Moun;ng Arm
Adachment
)
(Op;onal
Removable
Trunnion Mount
Adachment
)
(Included
FL3-RPA
Round Pole Adapter
, must use
(Op;onal
with FL3-MA)
2