resideo CHW3610W Guide De Démarrage page 4

Connect to WiFi
1 Choose your network from the list. Press NEXT.
2 Enter your WiFi password, if necessary. Press
NEXT.
3 When connected to WiFi, the LED will turn solid
green for 5 minutes, then turn off to preserve
battery life.
Note: If you remove and replace the detector's
batteries, it will reconnect to your WiFi network
automatically.
4 Configure
Continue to follow instructions in the app to
configure your detector.
Select the alert levels you want for high and low
humidity and temperature warnings, or keep the
preset levels. Identify the people you want notified
in case of an alarm. These settings can be updated
at any time using the app.
4