resideo CHW3610W Guide De Démarrage page 3

3 Connect
Pair and name your detector
1 Under Add New Device, select Water Leak and
Freeze Detector.
Note: Make sure Bluetooth is enabled on your
mobile device and that the detector's LED is
blinking blue. If it is not, see the Reset section.
2 Provide a location for your detector. Press
NEXT.
3 The detector will now pair with the app.
Note: If you have more than
one detector, you will need
to connect each detector
individually.
4 An audible alert will sound
and your detector's LED will
turn solid blue to indicate
your detector is paired. Press
NEXT.
5 Create a custom name for
the detector or select one
from the list. Press NEXT.
3