Orthofab R-NET Mode D'emploi page 3

Menu
principal
OMNI
Global
Profiled
Port 1
Port 2
Settings
Training Mode
Abréviation
ID: Any system Input Device, e.g. a JSM or the Omni.
SID: Specialty Input Device. Any specialty type of Input Device for connection to the Omni, e.g. head array, Tash Switch or mini joysticks.
User Switch: The switch for the User that initiates Profile/Mode changes and emergency stopping.
This was previously referred to as the Mode/Stop switch.
IOM: Input/Output Module. A universal Module that can de used as a simple TRACE Input Module, or as an Output Module equivalent to the Pilot+ ACM.
OBP: On-Board programming. A method of programming the R-NET system via the button on Omni's front panel.
Global
Sip and puff
Scan Speed
Sleep 12 V
Profiled
Prf Pr 1 Pr 2 Pr 3
Prt 1 1 1
Port 1/2
SID
Switches
Controls
User menu
Beeps
Settings
Set Time
Display Time
Backlight
Background
Training mode
Fwd Inhibit
Rev Inhibit
Left Inhibit
Right inhibit
Sip & puff
Calibrate
Puff threshold
Sip threshold
Deadband
Puff ramp up
Puff ramp down
Sip ramp up
Sip ramp down
Double click
Double click Time
Active double click
Switches
User switch
Switch detect
9 Way detect
Switch long
Switch medium
Switch debounce
Double click
Active double click
Controls
User control User control
Return to
Timeout to menu
Menu nav
Menu scan Rate
Auto repeat
F/R auto toggle
F/R auto tog time
Actuator Select
Actuator Axes
User menu
Position
Position type
Beeps
Profile change
Mode change
User menu entry
Menu scroll
Profile ID
Axis ID
Position 1-16
Position type Position type
Position 1-16
Position
Position 1 -16
3