Publicité
INSTALLATION: Adjustable Arm Mount
STEP 1: Unscrew to remove the cover of junction box
of adjustable arm bracket, pass the wires out from pole
through adjustable arm.
STEP 3: Pass the fixture's wires through the adjustable
arm bracket into junction box.
STEP 5: Connect the wires from pole to fixture's AC
input wires, L to L (Black-Black), N to N (White-White),
PE to PE (Green-Green); Connect dimming wires if
desired. Use connectors to connect [Dim + ] to fixture's
[Dim + ] (Purple), [Dim – ] to fixture's [Dim – ] (Pink), then
put all the wire inside of junction box.
INSTALLATION: Fixed Arm Mount
STEP 1: Loosen and remove the
screws from the fixed arm bracket,
open junction box cover; pass
fixture's AC input wires through
bracket.
STEP 2: Assemble the adjustable arm bracket on the
pole, tighten the fixing screws to lock with a wrench.
STEP 4: Hang the fixture body on the adjustable arm,
then tighten the fixing screws to lock the fixture body with
a wrench.
STEP 6: Install the cover back to junction box, tighten
the screw with a wrench.
STEP 2: Assemble fixed
arm bracket to fixture body
by tightening fixing screws
with a wrench.
4
STEP 3: Remove the screws with
screwdriver, place the iron bar aside,
remove the fixing screws to open the
junction box cover, then pass fixture's
AC input wires through junction box.
Publicité
