OXFORD BABY 42533 Instructions De Montage page 13

THIS STEP REQUIRES :
3. Right side (1 pc)
FIG 4
C
STEP 2 :
- Lay Right side (3) upside down.
- Insert Dowel (F) into middle hole on top back panel (7), bottom back panel (8).
- Attach Top back panel (7) and Bottom back panel (8) to Right side (3) by using Allen bolt (A), Barrel nut (B),
Spring washer (D) as shown in FIG 4. Tighten all bolts with Allen key (L).
- Insert the tenon on the end of Top front rail (4), Drawer rail (5) and Bottom rail (6) into mortise on Right side (3)
as diagram. Secure top front rail (4) and bottom rail (6) by using Allen bolt (A), Barrel nut (C), Spring washer (D)
as shown in FIG 3. Tighten all bolts with Allen key (L).
90-42533-V-01
STEP 2 " ASSEMBLY OF DRESSER"
(L) Allen key (1 pc)
(C) Barrel nut (6 pcs)
8
7
A
F
L
D
(A) Allenbolt 2-3/4" (70mm) (6 pcs)
(D) Spring washer (6 pcs) (F) Dowel Ø8x30mm (2 pcs)
FIG 3
C
6
5
5
F
4
C
F
C
D
A
5 of 8
D
A
L
3
D
A