Uline H-7684 Mode D'emploi page 2

3. Insert four 1/4 x 1½" screws (8) through side frame
tube into holes located on underside of seat
cushion. (See Figure 3)
Figure 3
4. Use Allen wrench to fully tighten all screws.
5. Position seat cover over seat cushion and secure
using four 1/4 x 1¼" screws (7). (See Figure 4)
Figure 4
PAGE 2 OF 6
ASSEMBLY CONTINUED
6. Add covers to back of side frames.
8
7.
7
1-800-295-5510
uline.com
(See Figure 5)
Figure 5
Floor glides can be adjusted to compensate for
uneven floors. (See Figure 6)
Figure 6
0921 IH-7684