Hints On Disposal; Declaration Of Conformity - Klarstein 10006660 Mode D'emploi

1. Insert the adaptor into the socket located on the back side of the product and plug it into the electrical outlet.
2. Open the front cover using the „PUSH" button and pull out the watch holder using your index finger and thumb.
3. Place the watch around the watch holder and lock the watch holder back into place.
4. Turn the ON/OFF switch to ON.
5. Select one of the Rotation modes by sliding the switch to either A,B,C or D and then the corresponding
cycle will begin.
6. Close the cover.
Mode A The winder will rotate clockwise 6 minutes then stop for 30 minutes and then it will repeat
this cycle.
Mode B The winder will rotate counterclockwise 6 minutes then stop for 30 minutes and then it will
repeat this cycle.
Mode C The winder will rotate clockwise for 20 minutes then stop for 10 minutes then it will rotate
counterclockwise for 20 minutes then stop for 10 minutes then it will repeat the entire cycle.
Mode D The winder will rotate clockwise for 10 minutes then counterclockwise for 10 minutes. It will
repeate this cycle for 3 hours continuously and then when it has finished, it will stop com-
pletely for 9 hours. Once the 9 hour rest is complete it will repeat this entire cycle.
According to the European waste regulation 2002/96/EC this symbol on the product or
on its packaging indicates that this product may not be treated as household waste. In-
stead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
5
Operation

Hints on Disposal

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)