Pleasant Hearth OFW577HC Instructions De Montage page 5

ASSEMBLY INSTRUCTIONS
2. Attach the back supports (C), left front support
(G), and the right front support (L) to the
bottom base (M) using eight M6x12mm bolts
(AA). Do not tighten completely at this time.
Hardware Used
AA
M6x12mm Bolt
3. Attach the back mesh panel (D) to the back
supports (C) using four M6x12mm bolts (AA)
and four M6 nuts (BB). Do not tighten at this
time.
Hardware Used
AA
M6x12mm Bolt
BB
M6 Nut
4. Attach the two side mesh panels (E) to the
supports (G and L) using eight M6x12mm
bolts (AA) and eight M6 nuts (BB). Do not
tighten at this time.
Hardware Used
AA
M6x12mm Bolt
BB
M6 Nut
2
x 8
3
x 4
x 4
4
E
x 8
x 8
G
5
C
C
G
M
D
L
C
C
L