Publicité
Les langues disponibles
Les langues disponibles
JUSB3~4: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
⚠
Important
Note that the VCC and Ground pins must be connected correctly to avoid possible
∙
damage.
∙
In order to recharge your iPad, iPhone and iPod through USB ports, please install
MSI Center utility.
JOCFS1: Safe Boot Jumper
This jumper is used for Safe Boot. Once enabled, the system will boot with default
settings and lower PCIe (from CPU) mode.
2
1
Pin
Signal Name
1
VCC
3
USB0-
5
USB0+
7
Ground
9
No Pin
Normal
(default)
Boot with the saved
BIOS settings.
40
10
9
Pin
Signal Name
2
VCC
4
USB1-
6
USB1+
8
Ground
10
NC
Enabled
Apply the BIOS default
settings and lower PCIe
(from CPU) mode for
Safe Boot
Publicité
