SATA_1~4,A1~A2: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
⚠
Important
Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
∙
transmission otherwise.
∙
SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.
JDASH1 : Tuning Controller connector
This connector is used to connect an optional Tuning Controller module.
SATA_A2
1
No Pin
3
MCU_SMB_SCL_M
5
VCC5
35
SATA_2
SATA_1
SATA_4
SATA_3
SATA_A1
2
6
1
5
2
NC
4
MCU_SMB_SDA_M
6
Ground