Lotus 50000 Manuel D'utilisation page 8

I. Function of
watch.
1.1 Button description:
A: Touch Screen/ Full Touch Screen
B: Back. Long Press for Power on and off
1.2 Charging instructions:
Magnetic charging is as shown below.
*Only charge the watch in the way shown.
Incorrect charging may damage the watch.
Be aware that the two contacts of the USB cable
are not allowed to contact the conductor at the
same time, or it will cause the circuit to burn.
1.3 Watch Face in standby mode:
1) Swipe right to open Notifications.
2) Swipe down to open the drop-down menu
to control brightness, enter settings, and Do
not Disturb function.
3) Swipe up to open the main menu.
4) Press and hold the screen while in standby
mode to change the watch face design.
Select by tapping the screen.
5) Tap once to display data on heart beats per
minute, steps and calories.
1.4 Messages
Swipe right on the main screen to open No-
tifications. To enable notifications, connect
the watch with the Lotus SmarTime app and
enable the relevant permissions. In the app,
you can enable App notifications, Call noti-
fications and SMS notifications. When notifi-
cations are received on your phone, they will
show up on the watch, which can display up
to 8 notifications.
1.5 Drop-down menu
Swipe down screen interface to open the
drop-down menu.
1) The left icon shows Bluetooth connection
status
2) Tap the middle icon to toggle Do Not Dis-
turb mode. When Do Not Disturb mode is
on, the device only vibrates for the Find de-
vice and Alarms functions.
3) The right icon can be used to adjust the
screen brightness.
4) Battery level is shown in the upper part of
the screen.
1.6 Step count
The step counter is on by default. This inter-
face displays the current number of steps on
the watch. Steps are counted starting from
midnight. Swiping left you can find the data
regarding distance covered and calories
burned.
1.7 Sleep monitor
The sleep monitoring time period is from
21:00 to 9:00 the next day. After the sleep
pattern has been recorded on the device,
sleep data is sent to the Lotus SmarTime app.
Swiping left you can find data on the hours of
light and deep sleep.
1.8 Bluetooth music
Android: after connecting the watch via the
phone settings, open the music player, play/
pause and switch songs; (no need to bind in
the app, if it is already bound, please unbind
it and connect in the phone settings).
Apple: When connected to your phone you
can play, pause and switch songs directly via
the watch.
8