M Confort AIR ENGINE Manuel De L'utilisateur page 32

For proper operation of the equipment, maintenance and cleaning
of said prefilters and filters must be carried out. To do this, please
contact the technical service through:
sat@mconfort.com
5.2 WATER TANK CLEANING
1. Unplug the power supply and open the drain plug at the bottom
to empty the tank.
2. Contact the technical service through sat@mconfort.com
5.3 BODY SURFACE CLEANING
1. Clean the surface of the unit and wipe it off with a damp cloth. It
is strictly forbidden to rinse directly with water.
2. Do not clean with corrosive detergent or solvent.
3. Before cleaning the unit, be sure to turn off the power and unplug
the power cord, or else it may cause electric shock.
5.4 INSTALL AND AFTER USE CLEANING
1. Install the rear window assembly, the side wet curtain assembly,
the side bypass channel and the wet curtain cover properly in order.
2. Connect the power supply and confirm that the unit is working
properly.
the power cord, or else it may cause electric shock.
5.5 MAINTENANCE
1. When the unit is not used for a long time, unplug the power, pack
the unit and prevent dust from entering.
2. Before packaging, ensure that the wet curtain and filter are dry,
and there is no water in the water tank.
5.6 PRODUCT STORAGE
When the product is not used for a long time, pull out the water
plug at the bottom of the water tank to drain the water in the tank,
and re-tighten the water plug. Dry the wet curtain thoroughly with
normal wind, unplug the power cord, wrap the machine to prevent
dust from entering, and store it in a dry and ventilated place.
1 5