Filling Water - M Confort AIR ENGINE Manuel De L'utilisateur

2. Power failure memory function
A. In the power-on state, when the power is restored after power off, the
device beeps 10 times (once per second), no display or operation; it restores
the last power-on state after 30 seconds (all functions are restored, includ-
ing the new long-term work protection function).
B. If you press the power button during the recovery time, the last state is
restored immediately.
C. Countdown of the timer function /delay start function also needs to
remember. The error of each power failure shouldn't exceed 5 minutes
(ignoring the power outage time).
D. The power-off memory function isn't available when the power is turned
on again after normal shutdown.
3. Automatic shutdown function
When the machine has been working continuously for 15 hours without any
operation (no button or remote control operation), it will automatically shut
down. When it is turned on again, it enters the state before shutdown. If you
want to cancel this function, press and hold the "Cooling + Time" button for
3S, and the automatic shutdown function is canceled when the buzzer
beeps; pressing the two buttons for 3 seconds again will resume the auto-
matic shutdown.

4.4 FILLING WATER

If you need to turn on the cooling and humidification function, please add
water to the water tank. Manual filling and automatic filling are available.
1. Manual filling
Before filling water, first open the water gate and slowly inject the water into
the tank. After filling the water, close the water gate again.
FIG 1.
Open the water
gate.
FIG 2.
Fill water
manually.
1 2
FIG 3.
Automatic
filling