Installing The Appliance On A Wall - Gaggenau AR 401 742 Instructions D'installation

Installing the appliance

Installing the appliance on a wall

9
CAUTION
Ensure that there are no electric wires, gas or
water pipes in the area where holes are to be
made.
1 Create the wall breakthrough with a diameter of at
least 8¼" (210 mm).
2 Drill mounting holes
passage with a diameter of at least
3 Press in the wall plugs flush with the wall.
8
5 / " (8 mm) and the cable
16
13 / " (20 mm).
16
4 Seal the mounting plate appropriately and tighten it.
5 Guide the mains cable and the control cable
through the wall
(A)
6 Screw the fan module onto the mounting plate
7 Secure the exhaust air pipe to the connecting
piece. Smooth the connection area beforehand.
8 Screw the inner control unit tightly into the wall.
.
.
(B)