Exhaust Ducting; Stacking Kit - Ariston AS65VXSNA Instructions D'utilisation, D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions

Exhaust ducting

The ducting system for the dryer must be as short and
straight as possible and with as few elbows as possible.
Four-inch rigid metal ducting should be used, metal
flexible ducting can be used but the maximum length
of ducting if using this type will be reduced and
bends in the duct will reduce this length further. Never
use plastic ducting. All elbows must also be a minimum
of 4-inch (100mm) diameter. Joints must be secured
with ducting tape. Do not use screws, as lint can
collect on the screws.
Maximum length of duct:
Number
Rigid Duct
of Elbows:
0
22 ft. (6.6m)
1
18 ft. (5.4m)
2
14 ft. (4.2m)
3
6 ft. (1.8m)
The above assumes that an approved venting hood is
used and that the flap on this hood must not have
magnetic catches.
WARNING:
- The appliance MUST NOT be exhausted into a
chimney, a wall, a ceiling, or a concealed space of
a building.
- To reduce the risk of fire, this appliance MUST BE
EXHAUSTED OUTDOORS.
- Do not discharge the exhaust air into a flue, which
is used for exhausting fumes from other appliances
burning gas or other fuel.
Depending on the frequency of use it is essential that
the ducting is checked periodically and any fluff or
debris removed.
service@aristonamerica.com
All manuals and user guides at all-guides.com
Flexible Duct
15 ft. (4.5m)
12 ft. (3.6m)
9 ft. (2.7m)
4 ft. (1.2m)

Stacking kit

The dryer is provided with a stacking kit, which allows
the dryer to be fitted to the top of an Ariston washing
machine:
Model AW125NA
Model AW129NA
Model AW149NA
The kit contains all the necessary brackets and screws.
Tools needed:
No.2 Philips Screwdriver
2mm drill, power or hand drill
SAFETY
For personal safety, DO NOT try to fit the dryer on
top of the washing machine on your own. A second
person should help to lift the tumble dryer onto the
washing machine and to relocate the stacked
washer and dryer.
1. You will need to get to the sides of the washing
machine to fit the stacking kit and dryer. If necessary
pull the machine away from its location to gain
access to the machine to fit the stacking kit and
dryer.
2. Follow the instructions provided with the stacking
kit.
EN
11

Publicité

Table des Matières
loading

Table des Matières