Mounting The Screen
Selecting The Mounting Hardware To Attach Brackets To Flat Panel
1) Identify the correct diameter screw for the flat
panel threaded inserts. The correct screws
should thread easily and not pull out when
tension is applied.
2) To determine proper screw length, insert thread
depth indicator into a threaded insert on the flat panel.
3) Mark the thread depth indicator 1/8" above the
depth of the threaded insert.
4) Select a screw length that is closest to the mark made
on the thread depth indicator.
NOTE: Do not use any screw longer than 1/8" from
the mark or damage to flat panel may occur.
Small Straw
or toothpick
For Flat Back Screens
Small Straw
Depth Plus 1/8"
or toothpick
Allowance Mark
Mark 1/8" Above Depth
Threaded Insert
Thread Depth Indicator
Depth Plus 1/8"
Mark Allowance
Page 13