Table des Matières
Publicité
Liens rapides
Publicité
Table des Matières
Sommaire des Matières pour Middle Atlantic Products Display Station Serie
- Page 1 Instruction Sheet Display Station Series DS-1000-SC-AL / DS-1000-SL-AL LISTED DS-1000SL-AL THANK YOU Thank you for purchasing The Display Station DS-1000-SC-AL / DS-1000-SL-AL. Please read these instructions thoroughly before installing this product. I-00714 Rev A...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS / INSTRUCTIONS IMPORTAANTES SUR LA SÉCURITÉ DANGER HAZARDOUS VOLTAGE/DANGER HAUTE TENSION CAUTION! To avoid an unstable condition, place heavier The lightning flash with the arrowhead symbol, within an equilateral components at the bottom of the cabinet. When more than triangle is intended to alert the user to the presence of uninsulated one component is placed in the cabinet, begin at the dangerous voltage within the product’s enclosure that may be of...
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed, including the following: • For institutional use. • Read and follow all instructions before using. •. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. - Page 4 INSTRUCTIONS IMPORTAANTES SUR LA SÉCURITÉ Lorsque vous utilisez des mobiliers électriques, toujours respecter les précautions de base, notamment : • Usage institutionnel. • Lire et suivre toutes les instructions avant l'utilisation du matériel. • Confier toutes les réparations à un personnel qualifié. Une réparation s'impose lorsque l'appareil a été endommagé d'une manière quelconque, par exemple en cas d'endommagement du cordon d'alimentation ou de sa fiche, de renversement de liquide ou de chute d'objets à...
-
Page 5: Weight Ratings
WEIGHT RATINGS ITEM DETAILS 175 lbs. (79.3 kg) Maximum Display (60” to 100”) Total Rated Load 185 lbs. (83.6 kg) Maximum SPECIFICATIONS DETAILS ITEM Power Strip Maxium Load 12 Amp 1500 Watts @ 125 VAC DISPLAY MAXIMUM: 175 LBS (79.3 KG); 60”... -
Page 6: Table Des Matières
TABLE OF CONTENTS ..................Important Safety Instructions ...................... Weight Ratings ...................... Specifications ................... Hardware/Items Supplied ....................Assembling The Base ................Attaching The Column To The Base ....................Installing The Covers ................Installing The Plate Mount Brackets ..................Installing The Universal Plate ................. -
Page 7: Hardware/Items Supplied
HARDWARE/ITEMS SUPPLIED DS-1000-SC-AL / DS-1000-SL-AL Middle Support (x1) Left Base (1) Right Base (x1) Left Cover (x1) Right Cover (x1) Universal Plate (x1) Left Adapter Bracket (x1) Right Adapter Bracket (x1) Plastic Cover (x2) M6x20 (x1) ST4.2x9.5 (x4) Plate Mount Bracket (x2) Column (x2) M8x16 (x8) M8x65 (x8) -
Page 8: Assembling The Base
Assembling The Base 1. Assemble left and right bases to middle support using washer plates and hardware as shown. 2. Tighten all screws with a Hex key. NOTE: With the brake wheels facing forward. Attaching The Column To The Base 1. -
Page 9: Installing The Covers
Installing The Covers 1. Snap left and right covers in place. Attach tape (F1) here under covers D and E Installing The Plate Mount Brackets 1. Insert the plate mount brackets into the columns along the column rails respectively. 2. Tighten all screws to secure the plate mount brackets. Keep both plate mount brackets at the same level. -
Page 10: Installing The Universal Plate
Installing The Universal Plate 1. Insert the universal plate to the plate mount brackets and align the holes in the universal plate with the holes in the plate mount brackets. 2. Install the screw into either of two holes. NOTE: Tighten all screws but do not over tighten! Page 10... -
Page 11: Installing The Universal Plate (Continued)
Installing The Universal Plate (Continued) 1. Attach the two plastic covers to both ends of the universal plates using the screws and tighten all screws to secure. Page 11... -
Page 12: Installing The Top Covers
Installing The Top Covers 1. Attach the top covers to the columns using the appropriate screws. Tighten all screws with a hex key. Installing The Adapter Brackets 1. Adjust the adapter brackets to align with display mounting holes, then tighten all screws using a proper screwdriver. Page 12... -
Page 13: Mounting The Screen
Mounting The Screen Selecting The Mounting Hardware To Attach Brackets To Flat Panel 1) Identify the correct diameter screw for the flat panel threaded inserts. The correct screws should thread easily and not pull out when tension is applied. Mark 1/8” Above Depth 2) To determine proper screw length, insert thread Threaded Insert depth indicator into a threaded insert on the flat panel. -
Page 14: For Recessed Back Screens Or To Access A/V Inputs
For Recessed Back Screens Or To Access A/V Inputs NOTE: Choose the appropriate screws, washers and spacers (if necessary) according to the type of display. • Position the adapter brackets as close as possible to the center of the displays. •... -
Page 15: Hanging The Display Onto The Universal Plate
Hanging The Display Onto The Universal Plate 1. Lift the display carefully and pull downward two straps at the same time, then hook the adapter brackets to the universal plate. Fasten the adapter brackets to the universal plate by releasing the straps. 2. -
Page 16: Cable Management
Cable Management 1. Insert the cable clamps horizontally into the plate slots, then turn the cable clamps to the vertical to secure them. 2. Run the cables through the cable clamps and the rubber strip. Page 16... -
Page 17: Warranty
WARRANTY Middle Atlantic Products (the "Company") warrants the The Display Station DS-1000-SC-AL / DS-1000-SL-AL to be free from defects in material or workmanship under normal use and conditions for a period of (7) seven years from date of shipment by the Company.