Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. Lower Exhaust – Using a 10mm socket remove the bolt from the exhaust hanger on the outboard side of the framerail, push hanger up and outward to remove
from the framerail. Using exhaust hanger removal pliers, remove the rubber exhaust hanger near the rear differential. Be sure to support the exhaust to prevent
damage. Set fasteners aside for reinstallation.
©2019 Horizon Global™ Corp - Printed in Mexico
Sheet 5 of 33
36787NP
8-8-19
Rev. A
Publicité
Table des Matières
