Timer Settings - Objecto F1 Mode D'emploi

Timer Settings

OFF Timer Settings
By setting the OFF timer, operation can be stopped automatically after the
set time.
1. Press the Timer Button During Operation to Set the OFF Timer
When you press the
operation, the timer lamp lights up in green and the OFF timer is set.
The OFF timer operation time can be set by pressing the
main unit or remote control.
About the Timer Lamp
Each time the
timer lamp switches as shown below.
1H
(1 hour)
(Unlit)
(Timer cancel)
After setting the ON / OFF timer, the timer lamp changes over the passage of time,
and the time until the timer operates is displayed.
8H
(8 hour)
(Unlit)
(Timer operation)
The timer lamp lights up in green when an OFF timer is set, and red when an ON
timer is set.
* You can not set both the ON timer and OFF timer at the same time.
2. Canceling the OFF Timer
Press the timer button on the main unit or the remote control several times to
turn off the timer lamp.
ON Timer Settings
By setting the ON timer, operation can be started automatically after the set time.
1. Press the Timer Button while Operation is Stopped to Set the ON Timer
When you press the
operation is stopped, the timer lamp lights up in red and the ON timer is set.
2. Set the Air Flow etc. to Operate at the Set Time
Press the air fl ow button on the main unit or remote control to set the air fl ow
to operate at the set time. The set air fl ow lamp blinks.
• You can set the air flow to operate at the set time by pressing the
button or the
• The settings can be confirmed by the blinking of the lamp.
timer button on the main unit or remote control during
timer button on the main unit or remote control is pressed, the
2H
(2 hour)
(8 hour)
4H
(4 hour)
(1 hour)
timer button on the main unit or remote control while
Rhythm / Night-time air flow button.
4H
(4 hour)
8H
2H
(2 hour)
1H
9
English
timer button on the
Oscillate