Objecto F1 Mode D'emploi page 13

How to Fold the Stand
This fan can be stored compactly by folding when not in use.
1 Stop operation, unplug the power plug from the outlet, and remove the
AC adapter from the main unit.
2 Hold the base and the handle, and slowly move the stand down toward
the base side. (Reverse of "2. Hold the base and raise the stand" on
page 6)
(Store the remote control and AC adapter in an appropriate place)
* When folded, do not leave leaning against a wall in an area where people
regularly pass.
CAUTION
• Be careful not to pinch your fingers when folding.
• Do not carry by holding any part other than the handle.
Cleaning
Normal Cleaning (When the Fan is Dirty)
Wipe the dirt on the main unit with a soft cloth that has been immersed
in lukewarm water or dishwashing detergent (excluding citrus type), and
firmly squeezed. Then wipe gently with a dry cloth. (Do not rub the resin
parts vigorously. Doing so may cause scratches.)
Normal Cleaning
Remove dust on the front and rear guard vents with a vacuum cleaner.
CAUTION
After cleaning, be sure to install the blades, the blade-mount spinner, and
the front guard correctly to the main unit.
The fan can be stored in a narrow space.
13
English