Memory Function - Objecto F1 Mode D'emploi

Starting and Stopping Operation
1. Starting Operation
When you press the
operation starts.
• During normal use, operation starts with the previous settings for air flow and
Oscillate, using the memory function.
• When you first press the
after plugging the power plug into the outlet, operation starts with very weak air
flow and no Oscillate.
2. Adjusting the Air Flow
Adjust the air fl ow by pushing the
remote control.
Very weak
* "Turbo" is the strongest air flow.
CAUTION
• Do not start operation without raising the stand.
• Keep the front and rear guard vents a sufficient distance from the
surroundings.
Also, for safe operation of air intake and Oscillate, check the distance of the
surroundings before starting operation.

Memory Function

When you press the
operation starts with the previous settings (air fl ow / Oscillate).
* If you disconnect the power plug from the outlet, the fan will reset to the initial
settings.
[Initial settings] Air flow: Very weak. Oscillate: None
3. Operating the Rhythm / Night-time Air Flow Functions
When you press the
remote control during operation, the function switches.
Green lamp lit
(Rhythm air fl ow)
power button on the main unit or the remote control,
power button on the main unit or the remote control
air fl ow button on the main unit or the
Weak Medium
(all lights)
Turbo
power button on the main unit or the remote control,
Rhythm / Night-time air fl ow button on the main unit or
Red lamp lit
(Night-time air fl ow)
Lamp off
(Cancel)
7
English
Strong