Parking Brake; Adjustment Of Brake Effect - Dolomite MAXI Mode D'emploi

BRAKES
Apply the brakes by pulling both brake-
handles upwards.

PARKING BRAKE

Press down carefully for parking brake. A
clear sound is heard when the brake is pla-
ced in correct position. N.b. Always place
both brakes in parking position. Pull
upwards to loosen the brake.
Both brakes must be in the parking position
when the walker is used as a seat.
ADJUSTMENT OF BRAKE
EFFECT
For desirable braking strength, adjust the
brake wire.
Suitable tools 8 mm and 10 mm spanner (not
included).
HANDLEBARS
To adjust the handle to a suitable height,
stand behind the walker with shoulders level.
The handles should be at the same height as
the user's wrist. A therapist may suggest dif-
ferent handle heights to accomodate the
special needs of a user.
For adjustment of handles with holes:
Loosen the knob completely, remove the
screw. Adjust the handle to suitable height.
Fix the screw into the hexagonal hole and
fasten the knob properly.
DOLOMITE MAXI
3