Motorola Solutions PMLN6538 Mode D'emploi page 3

DESCRIPTION
The headset with swivel boom microphone can be used
to maintain privacy in two-way radio conversations. This
lightweight accessory is useful when high noise levels
prevent the operator from hearing sound out of the radio
speaker.
IMPORTANT: You MUST turn OFF the radio before
PUSH-TO-TALK (PTT) OPERATION
1. Always switch the radio OFF before connecting
the headset.
2. Attach the audio connector to the accessory audio
port on the radio.
NOTE: Once the headset has been installed the radio
speaker and the radio microphone are both
disabled. The user must speak into the headset
microphone and use the headset speaker to
listen to incoming calls.
3. Turn the radio on, adjusting the audio volume to
appropriate level.
4. To transmit, press and hold the Push-To-Talk
button on radio and speak into headset
microphone. Release Push-To-Talk button on
radio to receive transmissions.
installing any accessory. Failure to do so
may cause the radio to constantly
transmit, and it will lock up any radio
system you are on. If this happens,
simply turn the radio off and on. You may
now continue with normal operation.
2