Cleaning And Care; Declaration Of Conformity (Doc); Technical Data - Renkforce 2616561 Mode D'emploi

9 Indirect streaming
With indirect streaming, you connect the dongle and the source device (example: smartphone) to the same
WLAN network (example: the office Wi-Fi network) and route the content via the WLAN network to the
dongle.
Compared to direct streaming, indirect streaming allows you connect multiple source devices to the WLAN
network and let them stream to the display device via the dongle one at a time.
Important:
Some Virtual Private Network (VPN) services might cause the connection between dongle and source
device to fail. Disable the VPN service on the source device, if necessary.
9.1 Connecting dongle to WLAN network
Before you can stream, use the source device to connect the dongle to the WLAN network (example: the
office Wi-Fi network).
Preconditions:
D
The dongle is connected to a display device.
D The LED indicator on the dongle is flashing.
1. Open the WLAN settings on the source device.
2. Connect the source device to the dongle WLAN. Use the SSID and password that are displayed on the
display device.
3. Open a web browser on your source device.
4. Input the IP address (192.x.x.x) that is displayed on the display device into the browser address bar.
Confirm your entry.
The dongle management platform opens.
Æ
5. In the management platform under Add WiFi, select and connect the dongle to the WLAN network
(example: the office Wi-Fi network).
The network details are displayed on the display to which the dongle is connected.
Æ
The browser window on your source device might go blank.
Æ
6. (Optional) Change the password via the management platform.
9.2 Streaming from Android devices by indirect connection
Streaming from Android source devices makes use of the Miracast protocol and the screensharing functions
on the device.
Notes:
Producers of Android devices use different names to refer to the Miracast protocol and the screen
sharing functions on the device. There are also differences in screen sharing support among Android
devices.
Preconditions:
D The dongle is connected to a display device.
D
The dongle is connected to the WLAN network.
D
The LED indicator on the dongle is flashing.
1. Connect the source device to the WLAN network to which the dongle is connected.
2. Enable the wireless screen sharing function on the source device.
3. Connect to the dongle by selecting the dongle ID shown on the display device. Example: Renkforce-
D8EF19.
The screen of the source device shows on the display device.
Æ
9.3 Streaming from Apple devices by indirect connection
Streaming from Apple iOS source devices makes use of Apple AirPlay.
Preconditions:
D The dongle is connected to a display device.
D
The dongle is connected to the WLAN network.
D
The LED indicator on the dongle is flashing.
1. Connect the source device to the WLAN network to which the dongle is connected.
2. Tap AirPlay on the source device and enable Mirroring.
3. Connect to the dongle by selecting the dongle ID shown on the display device. Example: Renkforce-
D8EF19.
The screen of the source device shows on the display device.
Æ

10 Cleaning and care

Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
11 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste
at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately
from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by
the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner,
must be removed by end users from the WEEE in a non-destructive manner before it is handed
over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options free of charge (more details on our website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set up by
manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.

12 Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms
to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of conformity
in the available languages.

13 Technical data

13.1 Power supply
Input voltage ......................................... 5 V/DC, 1 A
Power consumption .............................. 2.5 W
13.2 Wireless module
Wi-Fi standard ...................................... IEEE 802.11ac
Encryption ............................................. WPA2 (WPAS-PSK/WPA2-Enterprise)
Frequency range .................................. 2.400 - 2.497 GHz (2.4 G)
Frequency range .................................. 5150 - 5250 MHz (5 G)
Transmission power.............................. 11 - 13 dBm
Transmission distance .......................... max. 20 m
13.3 Video/Audio
Video decode and output ...................... 4K60
Stereo quality ........................................ 16 bits 48 kHz
13.4 System
Supported operating systems ............... iOS 9.0 or above, Android 5.0 or above
Supported wireless
communication protocols ...................... Airplay, Miracast, DLNA
13.5 Environment
Operating conditions ............................. 0 to +40 °C, 10 - 80 % RH (non-condensing)
Storage conditions ................................ -10 to +60 °C, 5 - 90 % RH (non-condensing)
13.6 Other
Dimensions (W x H x D) ....................... 90 x 33 x 13 mm
Weight .................................................. 24.5 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE. *2616561_v2_0922_02_DS_m_4L_(1)