Reset Device; Care And Cleaning; Declaration Of Conformity (Doc) - Renkforce 2249725 Mode D'emploi

Reset device

If you cannot pair the transmitter and receiver, or the wireless signal is not working as expected,
you may need to perform a reset.
• Press and hold the transmitter function key for approximately 10 sec, the LED indicator (1)
will blink to indicate that the reset was successful.
• Repeat the pairing process.
Using as a hub
The USB ports and SD card slots on the transmitter function as on a regular hub.
The computer display may reconfigure slightly when the hub is connected to your computer,
this is normal.
Troubleshooting
Problem Suggestion
Check the following:
• The cables are securely connected.
• The HDMI or VGA cables are suitable.
• It can take up to 15 s for the screen to cast, please wait.
• Make sure the mobile device/computer USB-C port supports video
output.
No display.
• The correct HDMI or VGA monitor source selection should be
selected.
• Check if the display has entered sleep mode, wake if needed.
• The transmission and receiver should be within 10 m from each
other (line of sight).
Reset the device is the above suggestions do not solve the
problem.
• Check the audio output is not muted.
No audio from the
HDMI port.
• Check the external monitor is set as the default audio output.

Care and cleaning

• Disconnect the product from the any connected peripherals and eject any memory cards
before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number
in the search box. You can then download the EU declaration of conformity in PDF
format.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
a) USB hub (transmitter)
Input voltage / current ................... 5 V/DC, 900 mA via USB-C
PC USB-C port ............................. must support video out
USB .............................................. 2x USB-A 3.2 Gen 1,
Card slots ..................................... 1x SD, 1x micro SD
Read speed: 50 - 104 MB/s
Write speed: 30 - 40 MB/s
Transmission frequency................ Dual band:
5150 - 5250 MHz
5725 - 5850 MHz
Transmission power...................... 12 dBm
Transmission distance .................. 10 m (line of sight)
Dimensions ................................... 112.5 x 57.5 x 14 mm (W x H x D)
Weight .......................................... 75 g
b) Display hub (receiver)
Input voltage / current ................... 5 V/DC, 900 mA via USB-C
Audio out ...................................... 3.5 mm jack
Video out ...................................... VGA 1080 p @ 60 Hz , HDMI 1080 p @ 60 Hz
Dimensions ................................... 115.5 x 60.5 x 22.5 mm (W x H x D)
Weight .......................................... 102 g
c) General
Device name ................................. Phoneix2019
Supported OS ............................... Plug and play: Windows
above; Linux 2.6 and above; ChromeOS; Android 6 and
above; iPad OS 13 and above
Operating/Storage conditions ....... 0 to +45 ºC, 10 – 85 % RH (non-condensing)
USB cable ..................................... USB-C to USB-A power cable (80 cm)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
10 and above; MacOS 10.15 and
®
*2249725_v4_1020_02_dh_m_en