Harrie Leenders Dia Instructions D'installation page 23

11. Installing duct material
• Place the pipe on the turning ring at the top of the stove.
• Check the connection.
13. Service: adjusting the door
• Remove the pipe and casing from the stove.
• Open the door.
• Adjust the door so that it hangs parallel using an open-end spanner
j.w. 10.
12. Rotatable?
• Fixed position: leave bolts in place as delivered.
• 2 x 45° rotatable: remove bolts no. 1 and release bolt no. 2
and secure it with the nut.
GB 21