Bestway 56432 Manuel Du Propriétaire page 6

can damage the welding points of the liner and bend the frame. In the worst cases, the pool can collapse, causing serious personal injury and/or
damage to personal property.
• We recommend positioning the pool away from any objects children could use to climb into the pool.
• Position the pool near an adequate drainage system to deal with overflow or to empty the pool. Ensure the pool side with the water inlet A and
outlet B is located in the same direction of the power source, where the filtration system has to be connected.
• The selected surface must be clear of any type of object. Due to the weight of the water, any object under the pool could damage or perforate the
bottom of the pool.
• The selected surface must be clear of aggressive plants and weed species. Those types of strong vegetation could grow through the liner and
create water leakage. Grass or other vegetation that may cause odor or slime to develop have to be eliminated from the set-up location.
• The selected location must not have overhead power lines or trees. Be sure the location does not contain underground utility pipes, lines or
cables of any kind.
• The selected position must be far from house entrance. Do not position any equipment or other furniture around the pool. The water that comes
out of the pool during use or due to product faults can damage furniture inside the house or surrounding the pool.
• The selected surface must be flat and without holes that can damage the material of the liner.
Suggested set-up surfaces: grass, ground, concrete, and all other surfaces that respect the above set-up conditions.
Surfaces to avoid: mud, sand, gravel, deck, balcony, driveway, platform, soft/loose soil or other surface that does not meet the above set-up
conditions.
• Check with your local city council for by-laws relating to fencing, barriers, lighting and safety requirements and ensure you comply with all laws.
• If a pump and/or ladder is included in the set, refer to the pump's and/or ladder's manual for safety instructions and installation. The ladder must
match the pool size.
• If during set up it is necessary to change the position of the pool, lift up the liner and do not drag it on the ground; the friction between the PVC
material and the ground can damage the pool liner.
• Follow the important instructions above to choose the correct surface and location to set up your pool. Damaged parts of the pool, due
to the fact that the set-up surface and location does not match the instructions, will not be considered as manufacture defect.
INSTALLATION
ASSEMBLING
• For installation instructions, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not
to scale.
• Assembly of the Frame Pool can be completed without tools.
• Installation usually takes approximately 20 minutes with 2-3 people excluding filling.
• To lengthen the life of your pool, it is important to sprinkle the top rails with the Talcum Powder before assembly. Talcum Powder is not included in
the package.
• Bestway will not be responsible for damage caused to the pool due to mishandling or failure to follow these instructions.
• We strongly suggest opening the package and assembling the pool when the environment temperature is above 15ºC / 59ºF; the PVC material of
the liner will become more flexible and easier to assemble.
FILLING POOL WITH WATER
• Do not leave pool unattended while filling with water.
• Fill the pool with water after all assembly steps are completed and until the water reaches the welding line, which corresponds to 90% of the full
capacity.
• Do not overfill as this could cause the pool to collapse. In case of heavy rainfall, we strongly recommend to reduce the water level to keep it at
90% capacity, to avoid overflowing of the water.
• When the pool is completely filled, check that the distance between the water surface and the top of the rails is the same all around; if it is
different, it means that the floor is not leveled so we strongly recommend to drain the water and re-level the ground.
• Keeping the pool full of water on unleveled ground can cause bursting of the welding points and/or pool collapse, causing serious personal injury
and/or damage to property.
MAINTENANCE
If you do not adhere to the maintenance guidelines below, your health might be at risk, especially that of your children.
WATER
• Keeping your pool water clean and chemically balanced is necessary. Simply cleaning the filter cartridge is not enough for proper maintenance;
we recommend you use pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not use granules) with the chemical
dispenser.
• Water quality is directly related to frequency of use, number of users and overall maintenance of the pool. The water should be changed every 3
days if there is no chemical treatment being performed with the water. It is highly recommended to use tap water for filling to minimize the
influence of unwanted content, such as minerals.
• We recommend that you take a shower before using your pool, as cosmetic products, lotions, and other residues on the skin can quickly degrade
water quality.
• Skim pool regularly to avoid settled dirt.
• Locate a bucket of water next to pool to clean users' feet before entering pool.
• The chemical maintenance must be performed with ChemConnect or chemical floater; don't throw chemical products directly in the water, the
chemical will deposit on the bottom and damage the material and discolor the PVC.
Chemical Tablets (Not Included):
• Your purchased pool set may not include any dispensers; in this case you can purchase one by visiting our website www.bestwaycorp.com or at
the nearest pool dealer.
• Remove the chemical dispenser from pool when the pool is in use.
• After performing chemical maintenance and before using the pool, use a test kit (not included) to test the water chemistry. We recommend
maintaining your water chemical balance as shown in the below table.
6