Temperature Setting; Operation Parameters - Kalamera KRC-75ASS Manuel D'utilisation

Temperature setting

 Using the ▲ and ▼ buttons to adjust the temperature，in the range of 5-18°C.
 Switch on/off the internal light using the LIGHT-button.
 Select degrees Celsius or degrees Fahrenheit using the
 Flashing LCD = Setting mode of the temperature.
 Constant LCD = Cooling temperature.
 Opening the door for long periods can cause a significant increase of the temperature in
the compartments of the appliance.

Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. High ambient temperatures and simultaneously operating at the coldest setting
may make the compressor operate permanently to keep the temperature
constant inside the appliance.
Helpful hints/energy saving
 Try opening the door as little as possible, especially when the weather iswarm
and humid. When you open the door, close it as soon aspossible.
 Permanently check , if the appliance is well-ventilated. The appliance has to be
well-ventilated from all sides.
 Disconnect the appliance from the mains if you do not operateit.
 Always keep the door seals clean and in a proper condition.
5
1. WARNING! Disconnect the appliance from the mains before you
clean or maintain it.
2. Always keep the appliance clean so that unpleasant odours do not occur.
3. Dust deposits on the condenser will increase the energy consumption. Clean the
condenser twice a year with a vacuum cleaner or a soft brush.
4. Take off all rings and bracelets before cleaning or maintaining the
appliance,otherwise you will damage the surface of the appliance.
CLEANING AND MAINTENANCE
C/
0
47
F-button
0
5