Before Initial Operation - Kalamera KRC-75ASS Manuel D'utilisation

Before initial operation

1. Leave the appliance in an upright position for 4-6 hours before you connect
it to the mains.
2. Clean the appliance thoroughly. Be very careful especially inside the appliance
(look at chapter
3. If the accessories inside the appliance are not fitted in their correct position,
replace them according to the image in chapter 4.
4. The appliance must be connected to the mains properly.
5. Allow the appliance to stabilize the temperature for approx. 24 h beforeuse.
6. Do not overfill the appliance.
7. Leave the appliance in an upright position for 4-6 hours before you connect it
to the mains.
8. Clean the appliance thoroughly. Be very careful especially inside the appliance
(look at chapter
9. If the accessories inside the appliance are not fitted in their correct position,
replace them according to the image in chapter 4.
10. The appliance must be connected to the mains properly.
11. Allow the appliance to stabilize the temperature for approx. 24 h beforeuse.
12. Do not overfill the appliance
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
).
).
46